Software and Drivers
HighSplit Quick Start Guide
Titan D3.1 Meter User Guide
QSIII User Guide
QAM Genacis User Guide
QAM Sniffer User Guide
QAM Sniffer Quick User Guide
QAM Compass User Guide
QAM Shadow User Guide
QAM Marker User Guide
M3 User Guide
Pathfinder Pro II User Guide
The Stick User Guide
SnapTRACK User Guide
SnapTRACK Quick Guide
SnapTRACK Quick Programming Guide
Sentinel User Guide
Sleuth II User Guide
Sniffer Shadow User Guide
Companion User Guide
Fiber Optic Test Equipment Downloads
TITAN Config Editor for Windows
Download the “TitanConfigEditor.zip” file onto your PC. Unzip and save the contained “TitanInstaller.exe” installer file onto the local drive. Access “TitanInstaller.exe” installer file to run installation. Follow installation
Post installation, connect TITAN meter to PC with miniB USB cable. Allow windows to install port drivers (2). Open program via start menu “Programs/ComSonics TitanConfigEditor/TianConfig”.
Select settings menu item to set appropriate USB communications Port. Using drop menu, select second newly assigned USB comm port for TITAN communications then “select”.
TITAN is now connected to Config Editor.
TITAN DOCSIS 3.1 Meter Firmware update V0.9.0.3
February 23, 2023.
Corrects DNS bug and speednet client error.
Download the “TITAN_FW_V0903.zip” file onto your PC. Unzip and save the contained “upgrade-36.tgz” file onto your local drive. Using a clean USB storage flash drive, connect the flash drive to your PC, rename the drive to “UPGRADE” and copy the “upgrade-36.tgz” file onto the flash drive. DO NOT UNZIP the “upgrade-36.tgz” file. Properly “eject” the flash drive.
Power up desired TITAN meter. Once the meter has completely booted, install the USB flash drive into either USB port on the TITAN meter. Firmware updates will install automatically. To verify installation, access Menu / System / About and verify version and date.
TITAN Meter Firmware update complete.