FEATURES:
Full Channel Sweep
- Analog and Digital Power Levels
- Slope
Home Qualification Ready
- Built-in memory to store test results
- Three independent memory locations:
- Tap, Bonding Block, Customer Premise
- Data automatically sent to server
w/ Web access through PC
- Pass, Fail, and Incomplete settings for job status
Reverse Path Analysis / Dwelling Ingress
- Continuous real-time sweep
- Single, Average, or Peak Hold Display
- X-Ray active ingress test capability*
Modem Tests
- DOCSIS 2.0 and 3.0 measurements
- Throughput and power level measurements
- Tests up to 8 x 4 DOCSIS channels
- Ping Tests for additional troubleshooting
AutoTest Capable
- Fully Configurable: Limits and Tests
- Shows predicted test time
Web Application
- Real Time View of Completed Jobs
and Related Test Data
|
|
| SPECIFICATIONS: |
|
| Frequency Range |
54 MHz to 1002 MHz Forward
5 Mhz to 65 MHz Reverse |
|
| Boot Time |
< 1 Second |
|
| Channel Sweep Time |
< 2 Seconds |
|
| Level Measurements |
|
| Range |
-40 to +40 dBmV Forward
-60 to +30 dBmV Reverse |
| Resolution |
0.1 dB |
| Accuracy |
± 1.5 dB |
|
| Digital Measurements |
|
| Input (Lock) Range |
64 QAM: -22 to +40 dBmV
256 QAM: -17 to +40 dBmV |
| BER; Pre and Post-FEC |
10-4 to 10-9 |
| MER |
Range: up to 40 dB
Accuracy: ± 1.5 dB (typical) |
|
| Modem Tests |
|
| Downstream Data Rate |
Up to 304 Mbps |
| Upstream Data Rate |
Up to 120 Mbps |
|
| General |
|
| Size |
6.9" x 4.9" x 1.6" |
| Weight |
18 oz |
| Battery |
2400 mA @ 7.4 Volt 8 hours continuous run time** |
| Charge Time |
3 hours |
| Operating Temp |
0ºF to 120ºF |
|
* X-Ray is a whole house active ingress solution which requires the separate purchase of the X-Ray transmitter.
** Excludes Modem on time |
|
|
